Remote Control Cars are a fun, simple toy that you can build yourself. They're perfect for kids of all ages, and they provide hours of entertainment. All you need is some basic supplies and a little patience. Here's how to make a remote control car:

1. Start by cutting two pieces of wood to the desired size. The wood should be about 1 inch wider than the car wheel base, so that it will fit snugly inside the wheel well. For more information about remote control car you can click here https://cadeauxdeparis.shop/collections/voiture-telecommandee-pour-enfant

2. Drill a small hole in one end of each piece of wood, just large enough for the wires to pass through. Make sure that the wires run parallel to each other, and that they're evenly spaced around the circumference of each wheel well.

Image Source : Google

3. Strip about an inch or two off each end of the wires, so that they're long enough to reach from one end of each wheel well to the other (about 18 inches should do). Twist each wire together once or twice near the ends to make them secure.

4.Attach one end of each wire to one side of a small toy motor (like those used for remote control cars).attach the other end of the motor cable to an appropriate switch on your controller (most controllers have several switches available). Test your circuit by turning on both motors at once – your remote control car should start moving! If it doesn't work right away, try rewiring it until everything works correctly.