Tag Archives: tiling Perth

Importance of Proper Tile Installation in Perth

Proper tile installation is essential

Nothing is more important than newly installed tiles in your kitchen or bathroom. These tiles will eventually wear down. Grout can become stained and dirty, this is a common problem. This is due to daily use and exposure to dirt, traffic, soap scum, and grease in the kitchen. It is essential that you have your tile properly installed because of the daily use.

Whether you are a do-it-yourselfer or looking for professional installation, you need to remember that floor covering can make or break a home. It can be labor-intensive, time-consuming, and very precise to install tiles. For example, professional floor tilers in Perth are typically craftsmen with years of experience and who know the latest methods and materials. You should do your research, including creating a tile layout plan.

Tile Layout Plans

Layout plans are used to determine the pattern and orientation of tiles. They also help you estimate the amount of tile that you will need and provide a guideline for how to proceed. Proper tile installation requires the use of spacers. The adhesive mortar is laid first, then the tiles are affixed.

After the grout has dried for 24 hours, it is applied to the gaps between the tiles. Finally, the tiles are cleaned with a sponge to remove any grout. It can be tedious to install tile so it is important to take your time and prepare.

Floor Substrates

Concrete, plywood, and drywall are all common materials that can be used for tile floor substrates in homes. These substrates should be prepared following industry guidelines and manufacturer guidelines. To provide a solid support base for tiles, the surface should be leveled. This will ensure that tiles are flat when they are installed and minimize the risk of cracking or chipping when weight is added.

The thin-set method is the most popular for installing tile. This involves affixing the tile directly to a backer board that is attached to the concrete substrate or plywood using a thin layer of mortar. Commonly known as CBU and this backer board provides a strong and water-resistant layer between the tile and substrate.